Race Pumps Part Number 1700 Fuel Pump
Carbureted Small Block Ford (Windsor)
Pump Type: Variable Displacement Reciprocating Piston
Maximum Flow 450 GPH
Unregulated Pressure 50 PSI (idle – 10,000 RPM)
Port Size -10 Inlet (-8 included), -8 Outlet (optional -10)
Housing Material 6061-T6 Billet Aluminum with Hard Anodized Finish
Internal Components Stainless Steel, anti-drain back feature
Seal Material Teflon
Dry Weight 1.1 Lbs
Priming Procedure Fill carb float bowls prior to initial start
Rebuild Procedure Rebuild kits available
The adapter plate bolts to the stock timing cover. Use a thin film of silicone, don’t use a gasket. The pump may be rotated to 3 positions to accommodate other bolt on components. Use a thin film of silicone on each side of the insulator plate.
Race Pump is pre-lubed and ready to install.
(Dry) used pumps must be pre-lubed with a few drops of light oil in the inlet and outlet ports.
A fuel pressure regulator must be used. The Race Pumps regulators are the only regulators designed to work with the Race Pump.
Fill carburetor float bowls prior to initial start, repeat if using large fuel lines and filters.
Using the proper regulator is extremely important. The Race Pumps regulators are the only regulators designed to work with the Race Pump.