Race Pumps Part Number 1701 Fuel Pump

EFI Small Block Ford (Windsor)

 

Specifications

Pump Type:                              Variable Displacement Reciprocating Piston

Maximum Flow                        450 GPH

Unregulated Pressure                150 PSI (idle – 10,000 RPM)

Port Size                                  -10 Inlet (-8 included), -8 Outlet (optional -10)

Housing Material                      6061-T6 Billet Aluminum with Hard Anodized Finish

Internal Components                 Stainless Steel, anti-drain back feature

Seal Material                            Teflon

Dry Weight                               1.1 Lbs

Priming Procedure                    Spray fuel directly into air intake

Rebuild Procedure                    Rebuild kits available

 

Installation

The adapter plate bolts to the stock timing cover. Use a thin film of silicone, don’t use a gasket. The pump may be rotated to 3 positions to accommodate other bolt on components. Use a thin film of silicone on each side of the insulator plate.

 

Race Pump is pre-lubed and ready to install.

 

(Dry) used pumps must be pre-lubed with a few drops of light oil in the inlet and outlet ports.

 

A fuel pressure regulator must be used. The Race Pumps regulators are the only regulators designed to work with the Race Pump.

 

 

Tuning Tips

Using the proper regulator is extremely important. The Race Pumps regulators are the only regulators designed to work with the Race Pump.